PVC Insulated Power Cable

本产品按GB12706《额定电压35kv及以下铜芯、铝芯塑胶绝缘电力电缆》标準生产，同时还可根据用户需要按国际电工委员会推荐标準IEC、英国标準、德国标準及美国标準生产。

The product is manufactured according to the stand of GB12706 or IEC,BS,DIN and ICEA upon request.

本产品适用于工频额定电压0.6/1KV及以下配电网或工业装置中固定敷设之用。

The product is suitable for use in power distribution lines or fixed insta-llations with rated power-frequency voltage up to and including 0.6/1KV.

工频额定电压Uo/U为0.6/1KV。

Rated power-frequency voltage Uo/U:0.6/1KV.

电缆导体的允许长期工作最高温度为70℃

Max.permissible continuous operating temperature of conductor: 70℃

短路时（最长持续时间不超过5s）电缆导体的允许最高温度：

导体截面 ≤ 300mm2 – 160℃；

导体截面 300 – 140>℃；

Max.short-circuit temperature of the conductor shall not excssd: (5smaximum duration).Cross-section of conducter ≤ 300mm2 – 160℃；

Cross-section of conducter > 300mm2 – 140℃,

电缆敷设时环境温度应不低于0℃。

The ambient temperature under installation should should not below0℃

电缆弯曲半径不小于电缆外径10倍。

The bending radius of a cable should not be less than 10 times of the cable diameter. 电缆的型号

Type of cable